Soundproof backer for Wallmate, flooring underlayment, behind drywall and other applications.

• Economical

• Recycled “green” Product

• 95% Post-manufacturer/Pre-consumer recycled material

• Tackable

• Easy to Install

MATERIAL: Synthetic fiber. Synthetic fiber binder materials.

FEATURES: Certified 95% Post-manufacturer/Pre-consumer recycled material. Will contribute to LEED MRc4.1-4.2 credits.

THICKNESS: 0.50” (+/- 2%)

SIZES: 2′ x 4′ or 4′ x 8′ panels

WEIGHT: 4000gm/sq m (120oz/sq yd)

4’ x 8’ sheets = approx.25lbs……….…68 sheets/pallet=1700lbs………12pallets/tkld.

2’ x 4’ sheets = approx.6.25lbs………272 sheets/pallet=1700lbs………24pallets/tkld.

DENSITY: 20 lbs/ft^3

R-VALUE: @0.50” thickness = 2.09 hr-ft^2-degF/Btu (4.19/inch)

FLAMMABILITY: Meets or exceeds the ASTM E-84-07 parameters for ‘Class A’ Interior Wall & Ceiling Finish Category

VOLATILE ORGANIC COMPOUNDS: Certified SCS Indoor Advantage – Gold. Passed Section 01350 VOC test to comply with Collaborative High Performance Schools (CHPS) and Office Spaces.

SOUND:

Impact Insulation Class (IIC) The method is designed to measure the change in impact sound transmission of a floor-ceiling assembly in a controlled laboratory environment. ASTM E2179-03. IIC = 20

Sound Transmission Class. (STC) The sound-insulating property of a partition element is expressed in terms of the sound transmission loss. (Stand alone product – no ceiling or wall assembly) ASTM E90-04, ASTM E413-04 STC = 15.

Noise Reduction Coefficient (NRC) A single number rating obtained by taking the arithmetic average of the absorption coefficients at specified frequencies, rounded to the nearest 0.05.

NRC = 0.50

Sound Absorption Average (SAA) A single number rating obtained by taking the arithmetic average of the one-third octave bands at specified frequencies, rounded to the nearest 0.01.

SAA = 0.49

INSTALLATION: Acoustical Adhesive

Celbar is a blend of specially prepared cellulose fibers, organic in nature, treated with adhesive and fire resistant chemicals. When sprayed in place, the interlocking fibers result in a mass that produces excellent sound and thermal properties.
Celbar is pneumatically spray-applied in wall and floor/ceiling cavities to form a monolithic coating. This process seals cracks and holes in the wallboard, around plumbing and electrical outlets, vent ducts and other irregularities. There are no compressed areas or voids to allow sound leaks, R-value reduction, or air infiltration.

Performance Where it Counts
Celbar provides superior sound transfer control demanded by building designers, owners and occupants. Celbar assemblies perform closer to lab tested STC ratings in the field than do other conventional batt and sound board systems. This is due to the complete coverage and the sealing action of Celbar.
The performance of Celbar compared to other identically constructed wall systems, as documented by laboratory tests is shown below.
The base system and results are as follows

Thermal Performance
Celbar’s R-value of 3.8 per inch allows you to design exterior wall systems with higher total R-values. However, R-value alone is not the only measure of a product’s thermal effectiveness. To obtain maximum thermal efficiency, air infiltration must be minimized. Sprayed in place, Celbar conforms to any substrate, around pipes, obstructions, and over cracks, reducing air infiltration and forming a highly efficient and effective thermal barrier. It can be sprayed to virtually any exterior stud or furred cavity, and in most cases the wall can be closed up the same day.

Energy Savings Example
In a series of tests, five identical buildings were monitored for KWH usage over an eleven month period. One building utilized sprayed cellulose in the walls, and the other four utilized fiberglass batt insulation. Upon conclusion, the cellulose-insulated building saved 32% of the KWH usage of the other buildings.

Metal Stud Assemblies Construction Detail
STC RATING 55 – 2 1/2″ metal studs, 2 layers 5/8″ gypsum board on one side, I layer 5/8″ gypsum board on the opposite side: 2 l/2″ Celbar Spray.
STC RATING 53 – 3 5/8″ metal studs, 1 layers 5/8″ gypsum board on each side: 2″ Celbar Spray.
STC RATING 51 – 2 1/2″ metal stud 24″ O.C. faced both sides with 5/8″ gypsum wallboard: 1 1/2″ Celbar Spray.

Wood Assemblies Construction Detail
STC RATING 51 – 2″ x 4″ wood studs, I layer 5/8″ gypsum board on each side: 31/2″ Celbar Spray.
STC RATING 50 – 2″ x 4″ wood studs, 1 layer 5/8″ gypsum board on each side: 2″ Celbar Spra

Contego Passive Fire Barrier is a heavy-bodied, single-part latex designed for use on construction materials such as Oriented Strand Board (OSB), Structural Insulated Panels (SIPS), framing lumber, plywood, trusses, drywall, doors, and more. May also be used on aluminum and steel sheets, round and box steel columns.

Method

E4 Acoustics is proud to introduce the markets first recycled cotton, high acoustical performance studio wall panel. The soundwave panel is made from 85% recycled cotton and is 100% recyclable.

Features:

• Recycled cotton (green acoustical material)

• Class A – nonflammable (Per ASTM E-84)

• Lightweight

• Easy to install (adhesively applied)

• Impact resistant

• Durable

• Low cost

• Fiberglass Free

•No Formaldehyde – No VOC’S

• Hi-performance acoustical absorption

• Proudly Made in the USA

• LEED™Eligible

Hanging acoustical baffles are a high performance acoustical material made from recycled cotton.

• No Fiberglass

• Economical

• Recycled Cotton Material

• LEED™

MATERIAL: Bonded Acoustical Cotton (B.A.C.). 100% Recyclable, Fiberglass Free.

PATTERN: Soft Textured Surface

FEATURES: Economical, Multi-Purpose, High Performance, Durable, Lightweight.

APPLICATIONS: Gymnasiums, Auditoriums, Classrooms, Music Rooms, Arenas & Stadiums, Churches, Offices, Computer Rooms, Restaurants/Cafeterias, Residential, Concert Halls & Theaters, Pro Audio, Gun Ranges, Manufacturing Plants, Machine Enclosures, Water Treatment Plants.

THICKNESS: 1”, 2”

SIZES: 2’ x 4’, Custom Sizes & Die Cut Parts Available

COLOR: White, Marble Light Blue, Light Grey, Beige, Charcoal, Pure Blue, Navy Blue, Burgundy and Hunter Green (Paintable), Cleanable Dupont Hypalon or Film Available

FLAMMABILITY: ASTM E84, Class A. Flame Spread: 5 Smoke Developed: 35

HEATLOK SOY®, a closed cell Spray Polyurethane Foam Insulation, has a unique ecological benefit that recycles plastic waste into a Rigid Spray Polyurethane Foam.

This helps to more efficiently utilize the world’s non renewable resources. HEATLOK SOY® can reduce excess waste and energy consumption in buildings by up to 50%. This is an excellent closed-cell spray foam insulation/air-barrier used in areas where relative humidity levels exceed 55%.

The Perfect High-Humidity Choice for:

• Basement Walls

• Between Radiant-Heated Floors

• Crawl Spaces

• Exterior Bathroom Walls

• Foundation Exteriors

• Swimming Pools

• Wine Cellars

K-13 is the spray-applied insulation tailored to your specific project requirements for insulation (R value), noise reduction (NRC), color, durability, condensation control, texture, and aesthetics.

In addition, it usually provides these features at lower installed prices than many common systems such as rigid board and batt insulations, sprayed plasters, and acoustical ceilings. It is applied to virtually any properly prepared surface configuration of wood, steel, concrete, glass and other common construction surfaces. K-13 can be sprayed up to five inches thick overhead in one application without mechanical support. Additionally, K-13 serves as the exposed finish requiring no additional materials.

K-13 is the spray-applied insulation tailored to your specific project requirements for insulation (R value), noise reduction (NRC), color, durability, condensation control, texture, and aesthetics. In addition, it usually provides these features at lower installed prices than many common systems such as rigid board and batt insulations, sprayed plasters, and acoustical ceilings. It is applied to virtually any properly prepared surface configuration of wood, steel, concrete, glass and other common construction surfaces. K-13 can be sprayed up to five inches thick overhead in one application without mechanical support. Additionally, K-13 serves as the exposed finish requiring no additional materials.

A Total System: Fiber, Binder, Application
K-13 is a total system of recycled natural fibers, chemical treatement, binding system and application method. The K-13 system begins with specially prepared cellulose fibers which are chemically treated to add resistance to fire, mold and mildew. K-13 is produced in a strict, quality controlled manufacturing process. K-13 is applied by an international network of licensed applicators through approved fiber machines and nozzles for control of the fiber/binder ratio. During application, the K-13 fibers are combined with a patented adhesive. The finished product is a strong, durable monolithic coating of a predetermined thickness. Some surfaces will require priming prior to being sprayed. K-13 is available in 6 standard colors, special color matching is available.

Naturally Tough – Naturally Attractive
Available in a wide variety of colors, K-13 is especially attractive as a surface finish in new construction as well as renovation projects. Available in six standard colors, K-13 can also be specified in specially matched custom colors.

Thermal Performance
K-13 insulates by creating dead air spaces between and within its hollow fibers. Because K-13 fibers are sprayed-in-place, they fill cracks, seams and voids, forming a monolithic coating over the substrate which helps reduce air infiltration. Unlike prefabricated insulations, K-13 has no voids or compressed areas to reduce thermal efficiency. The result is a more effective in-place product with exceptionally low heat loss characteristics. The patented adhesive utilized in the installation of K-13 adheres to virtually all common construction materials including: metal, wood, concrete, urethane, styrofoam and glass. Some surfaces may require pretreatment prior to installing K-13. This unique adhesive provides unequaled strength allowing applications of 3/4 inch to over 5 inches without mechanical support. This capability provides R-values from 3 to over 19.

Condensation Control
For areas such as indoor pools and ice arenas, K-13 aids in condensation control. The proper combination of K-13 and ventilation prevents condensation on metal, concrete and other surfaces. K-13 actually reduces ventilation requirements, saving in both the ventilation equipment investment and operating cost.

Acoustical Performance
The resilient fibers of K-13 absorb sound energy instead of reflecting it, reducing reverberation time and making speech and music more intelligible. Excessive noise is reduced with the application of K-13 while greatly improving ambient sound quality in a wide variety of building projects including auditoriums, sports facilities, detention facilities, television and sound studios, convention centers and parking garages.

Whether your facility has been around for years or is currently under construction, protecting your fibrous insulation and fireproofing with Protek-13® is a spray-applied, water based vinyl acrylic emulsion containing interlacing/bridging fibers forming a protective white coating over fibrous surfaces.

Acoustical Performance
Protek-13® provides a protective coating for your fibrous surfaces without significantly affecting the acoustical performance of the material underneath.
The following test was conducted by spraying two separate thicknesses of Protek13® over 1.75″ of K-13® Spray-On thermal/acoustical insulation. System 1 was applied in a standard coating, covering 96-98% of the K-13 underneath. System 2 was a heavy build, covering 99-100% of the underlying K-13®. The following chart shows the acoustical performance of both systems.

Protection from Physical Damage
High traffic areas are often vulnerable to physical damage from personnel, machinery, birds and other sources. The tough resilient surface of Protek-13® resists abrasion and prevents the “picking away” of the fibers. This protection can greatly extend the useful life of the covered building materials.

Protection for airborne contaminants
Dust, dirt, grease and fumes are present in almost every industrial environment. The firmer, more uniform surface of Protek-13® significantly reduces the accumulation of these airborne contaminants. In addition, Protek-13® can easily be swept with a broom, blown clean with compressed air or lightly washed with water (no scrubbing).

Solid fire performance ratings
Protek-13® has a Class 1, Class A flame spread rating of 5 according to ASTM E-84.

High light reflectivity
The application of Protek-13® can brighten your whole facility. This high light reflectivity greatly improves the safety of the working environment without requiring an increase in lighting power.

Colorful Options
Fibrous or porous substrate materials will absorb a great deal of regular paint without showing a significant color change. Protek-13® due to its bridging and interlacing fibers provides an easily obtainable uniform color (at the surface) requiring less material. If a custom color is desired at the time of installation, Protek-13® can be custom blended to match your design color scheme.

Quiet Natural Fiber Liner (Patent Pending) is a thermally bonded HVAC insulation that offers superior acoustic and thermal performance. Made from natural fibers, Quiet Liner contains no fiberglass and does not itch or cause skin irritation.

RECYCLED COTTON ACOUSTICAL LINER

• Excellent Noise Absortion

• Class A Fire Rate

• Reduces Heat Loss/Gain

• No Formaldehyde

• Resist Microbial Growth

• Low Air Resistance

• No Itch or Skin Irritation

SEALECTION® 500 is an insulation breakthrough. Spray-applied as a liquid, it expands within seconds to 120 times its volume to fill every nook and cranny providing superior energy efficiency and improved indoor air quality by eliminating air movement through walls.

SEALECTION® 500 is a non-toxic spray foam which has undergone extensive testing and meets the intent of all building code requirements. SEALECTION® 500 reduces airborne noise and dust making it the healthy choice for those who suffer from allergies, asthma or chemical sensitivity. SEALECTION® 500 is the smart choice for healthy living.

The Perfect Green Choice for:

• Cathedral Ceilings
• Conditioned attics
• Wall Cavities
• Wood and/or Steel Construction

SonaSpray “fc” is a spray applied acoustical texture designed for a wide range of project types.

SonaSpray “fc” provides an attractive, high performance solution to acoustical and lighting design objectives in both new construction and renovation projects. Typical installations include: schools, churches, passenger terminals, libraries, cafeterias, offices, hotels and condominiums.

SonaSpray “fc” is available in White and Artic White. Specially matched colors are also available as a design option.
Acoustical Performance
SonaSpray “fc”, as tested by a NVLAP accredited acoustical laboratory per ASTM C-423, provides an exceptionally high noise reduction coefficient (NRC). A typical installation of 1/2″ thick on solid backing, has an unequalled NRC of.65. At its maximum recommended thickness of 1″, the NRC is .90.

Substrate Compatibility
SonaSpray “fc” is spray applied and will conform to any surface configuration such as barrel vaults, concrete “T”, corrugated decks, pan construction and other complex surfaces. The high performance adhesive will bond to virtually all common construction materials including sheetrock, plaster, wood, metal and concrete. Some surfaces (such as water stained ceilings, wood and oxidized metal) will require sealing to prevent migratory staining of the SonaSpray “fc”.

Durability and Maintenance
The adhesive used to apply SonaSpray “fc” provides a strong, durable and resilient bond. This unique combination of properties provides remarkable durability. SonaSpray “fc” will resist impact and abrasion without cracking or spalling, typical to any cementitious or plaster based materials. In areas where even high abrasion resistance may be desirable, SonaSpray “fc” Dura-K may be specified. This provides even greater bond and compressive strength without reducing the acoustical performance. SonaSpray “fc” can be painted with water based latex or acrylic paint if desired, without appreciably reducing the NRC value.

Ure-K is a thermal barrier approved as a building interior insulation to delay the ignition and reduce the surface burning rate of low melting, combustible rigid spray-on polyurethane foam. Ure-K may be sprayed over foam in existing buildings or it can be used as a protective coating over foam in new construction projects as a combination system.

Thermal Insulation
Ure-K applied over polyurethane provides additional thermal resistance which will meet the stringent “R” values required for today’s energy conservation needs. The combination of Ure-K and polyurethane has the highest efficiency of all available insulations.

Noise Control
Ure-K is a monolothic coating which will provide a highly efficient sound absorption surface in either new or existing buildings. This is an important benefit in controlling noise levels to meet OSHA and other requirements.

Echo Eliminator is a high performance acoustical material made from recycled cotton.